X.OT.Defender

X.OT.Defender Three-phase complete submersible pump (3x380-415V / 50 Hz)

4” complete submersible pump, made of stainless steel ZDS hydraulic part, ZDS three-phase oil-cooled OT motor, Z-Defender.3 electronic control panel and supply cable in different lenghts. Reliable, strong and easy to maintain, it's available in a wide range of models.
It can be protected against many possible installation or operation faults thanks to Z-Defender.3 electronic control panel.
 
Z-DEFENDER.3
Electronic control panel with protection and diagnostic for direct start and running of ZDS three-phase submersible pump.
  • LCD display for easy diagnostic of running parameters or eventual protections
  • Sounder alarm in the event of a fault and in stand-by
  • Low voltage input for floats or pressure switches
  • Protection against dry running and lack of water in the well
  • Current overload protection
  • Protection against low/high voltage
  • Phase sequence input control
  • Protection against failures in a three-phase plant
Z-DEFENDER.3 is an innovative electronic panel essential to start, run and protect the three-phase ZDS submersible pump against many possible installation and operation faults. Z-DEFENDER.3 is designed to guarantee an optimal protection of the submersible pump against many possible installation and operation faults: an alarm will be shown on the dispaly in case of current overload, low voltage or high voltage, dry running, phase missing or phase imbalance; ensuring a high degree of automation and restoration. Z-DEFENDER.3 allows to continuously detect and monitor in real time the power: the electrical parameters obtained are processed by a special software, which will efficiently guarantee the correct working conditions.
With Z-DEFENDER.3, the submersible pump can work and be continuously protected also when the supply voltage values are at tolerance limit, providing the effectiveness of the protection operation. In addition, Z-DEFENDER.3, thanks to a “smart software” at variable time and automatic restart, can ensure the optimization of water withdrawal from the borehole or tank when the pump is dry running. Thanks to its special and innovative ZDS technology, Z-DEFENDER.3 combines, in a single device, protection, reliability and ease of installation.

 

Küldjön nekünk megkeresést!


  • kW: 0,37 - 2,2
  • Voltage range: 3x380-415V / 50Hz
  • Voltage tolerance 50Hz from nominal: +6% / -10% Un
  • Degree of protection: IP 68
  • Maximum quantity of suspended sand: 600 g/m3
  • Insulation: F
  • Rated ambient temperature: maximum 40° C
  • Cooling flow: min 8 cm/sec
  • Mounting: vertical/horizontal
  • Maximum delivery (Q): 15.000 l/h
  • Maximum head (H): 220 m
  • Maximum immersion depth: 150 m
  • Outlet diameter: 1" ¼ G-F, 2" G-F
  • Allowed range of water pH: 6,4 - 8,0

Automatikus védelmek

Szárazonfutás elleni védelem

Szárazonfutás elleni védelem

The control panel automatically stops the submersible pump showing an alarm on the display, to restart it after a programmed cycle time.

Magas/alacsony feszültség elleni védelem

Magas/alacsony feszültség elleni védelem

Avoid motor damages caused by too low or too high power supply voltages.

Túlterhelés elleni védelem

Túlterhelés elleni védelem

In case the submersible pump is partially or totally blocked, after some restart attempts it enters the stand-by mode.

Meghibásodás elleni védelem háromfázisú alkalmazásoknál

Meghibásodás elleni védelem háromfázisú alkalmazásoknál

The submersible pump is protected against phase-loss (caused by a brake of a fuse). The control panel protects the motor against damaging.

Fázisegyenetlenség elleni védelem

Fázisegyenetlenség elleni védelem

Z-Defender.3 will detect any faulty electric connection, protecting the motor from potential damage.

Teljesítmény-adatok

Letöltés

A megfelelő telepítés

  • If you are using a generator with an internal combustion engine, it is necessary that the generator’ s power measured in kW (in continuous delivery) is three times the rated power in kW of the submersible pump.
  • We recommend to install a proper cooling jacket in installations bigger than 10 cm, to guarantee the correct motor cooling flow.
  • Z-Defender.3 must NOT be used with a frequency inverter.

Töltse le a katalógusunkat!

Az árakat is tartalmazó katalógus letöltéséhez lépjen be or regisztráljon