X.H3.Defender

X.H3.Defender Single-phase complete submersible pump (1x220-230V / 50 Hz)

RELIABILITY AND LONGER LIFE

4” complete submersible pump, made of stainless steel ZDS hydraulic part, ZDS single-phase encapsulated water-cooled H3 motor, Z-Defender electronic control panel and supply cable in different lenghts. Reliable, strong and easy to maintain, it's available in a wide range of models. It can be protected against many possible installation or operation faults thanks to Z-Defender electronic control panel.
 
Advantages:
  • Ready to install
  • Doesn’t need any further calibration or setting up
  • Double capacitor predisposition: one for more starting torque and one for running
  • Already set for that model of submersible pump
Z-Defender
Electronic control panel with protection and diagnostic for direct start and running of ZDS single-phase submersible pump.
  • Ready to use: doesn’ t need any further calibration or setting up, as it's only necessary to select the type of motor on the display
  • LCD display for easy diagnostic of running parameters or eventual protections
  • Soft start technology
  • Extra torque on start up when necessary
  • Sounder alarm in the event of a fault and in stand-by
  • Double capacitor predisposition: one for more starting torque and one for running
  • When the pump is not used, even if it is in stand-by mode, weekly start-up will be commanded by the electronic, in order to avoid any blockage caused by natural sediments in the well
  • No energy consuption when in stand-by
  • Low voltage input for floats or pressure switches
Z-DEFENDER is an innovative electronic panel essential to start, run and protect the single-phase ZDS submersible pump against many possible installation and operation faults.
It's special and unique as it doesn't need any setting or self-learning, it's easy to install and ready to use, you only have to select the type of motor on the display and turn the pump on. Z-DEFENDER is designed to guarantee an optimal protection of the submersible pump against many possible installation and operation faults: an alarm will be shown on the dispaly in case of current overload, low voltage or high voltage, too frequent starts and stops and dry running; ensuring a high degree of automation and restoration.
Z-DEFENDER allows to continuously monitor the submersible pump, guaranteeing its operation in the most efficient way through a Soft start procedure (first start attempt with low starting torque) and if needed, a Strong start procedure to benefit of more starting torque.
It's equipped with 2 capacitors: the first capacitor does guarantee a higher starting torque to the motor, the second capacitor optimizes the motor's efficiency during its operation. Z-DEFENDER allows to continuously detect and monitor in real time the power: the electrical parameters obtained are processed by a special software, which will efficiently guarantee the correct working conditions. With Z-DEFENDER, the submersible pump can work and be continuously protected also when the supply voltage values are at tolerance limit, providing the effectiveness of the protection operation. In addition, Z-DEFENDER, thanks to a “smart software” at variable time and automatic restart, can ensure the optimization of water withdrawal from the borehole or tank when the pump is dry running. Z-DEFENDER also minimizes energy consumption when the pump is not running. Thanks to its special and innovative ZDS technology, Z-DEFENDER combines, in a single device, protection, reliability and ease of installation.

Trimite-ne o cerere


  • kW: 0,37 - 2,2
  • Voltage range: 1x220-230V / 50Hz
  • Voltage tolerance 50Hz from nominal: +6% / -10% Un
  • Degree of protection: IP 68
  • Maximum quantity of suspended sand: 150 g/m3
  • Insulation: F
  • Rated ambient temperature: maximum 35° C
  • Cooling flow: min 8 cm/sec
  • Mounting: vertical/horizontal
  • Maximum delivery (Q): 15.000 l/h
  • Maximum head (H): 220 m
  • Maximum immersion depth: 300 m
  • Outlet diameter: 1" ¼ G-F, 2" G-F
  • Allowed range of water pH: 6,4 - 8,0

Protecții automate

Protecție la funcționarea în gol

Protecție la funcționarea în gol

The control panel automatically stops the submersible pump showing an alarm on the display, to restart it after a programmed cycle time.

Protecție împotriva pornirilor prea frecvente

Protecție împotriva pornirilor prea frecvente

In case of leaks in the piping system (also when the pressure tank is exhausted or its membrane is damaged, or when there is a defective pressure switch) and too frequent starts and stops (for example if the tank is too small for the system), the control panel automatically makes the pump enter the stand-by mode showing an alarm on the display.

Protecție împotriva supra-tensiunii/sub-tensiunii

Protecție împotriva supra-tensiunii/sub-tensiunii

Avoid motor damages caused by too low or too high power supply voltages.

Protecție împotriva supra-sarcinii

Protecție împotriva supra-sarcinii

In case the submersible pump is partially or totally blocked, after some restart attempts it enters the stand-by mode.

Protecție împotriva vârfurilor de tensiune

Protecție împotriva vârfurilor de tensiune

Z-DEFENDER, on demand, can be equipped with internal filters designed to protect it from voltage peaks. Filters are repleaceble and of easy access. *Optional

Curba performanţei

Descarcă

Informații pentru o instalare corectă

  • If you are using a generator with an internal combustion engine, it is necessary that the generator’ s power measured in kW (in continuous delivery) is three times the rated power in kW of the submersible pump.
  • We recommend to install a proper cooling jacket in installations bigger than 10 cm, to guarantee the correct motor cooling flow.
  • Z-Defender must NOT be used with a frequency inverter.
  • Z-Defender is already set to work with the selected submersible pump, it doesn’t need any further calibration or setting up.

Descărcați catalogul nostru

Pentru a descărca versiunea cu prețurile login o registrati.